FSGenesis Europe !

Justin just completed the Europe 76,4 m mesh package!

Here is a screenshot I made (passing the Matterhorn, Switzerland)

http://members.aon.at/marcelwidi/tini/matterhorn.jpg

(thanks Marc for providing webspace ... you got any left for yourself?
*g*)

<<< Tina >>>


--
I use my alternate email-adress here, so responses
to email might take a while. :-)

"Tina Fisher" <tini_fisher@hotmail.com> wrote in message
news:2mc4svk0017h1e89puc3gbcut3dnkg01bh@4ax.com...


You know the European Airline Pilot "Campaign" flights stocked with FS2004?
They take a whole new look and feel when the Europe add-on was added-on.

I'm a sucker for the alps, they look lovely. Another success by Justin...He
will not stop until he's quantized the whole world! Muahhahaha! MUAHAHAH!
<pet persian kitty> <swirl high back chair>.

On Mon, 24 Nov 2003 17:44:49 GMT there was darkness, "Derek Wildstar"
<gunner@argo.mil> floated above the darkness and said :


yep, Justin rulezzzzz *g*

you know, I really would be willing to pay a substantial amount of $
if I could get 19,2 m mesh for the Alpes ... (Justin said it's there
but very expensive to get ...)
well, at least we got 19,2 m for the Matterhorn

<<< Tina >>>
--
I use my alternate email-adress here, so responses
to email might take a while. :-)

Tina, what are the specs for your rig? I'm running a P-4 3.0gig 800fsb,
with 1 gig of ram and an old GeForce 3 4800, and my scenery doesn'l look
anything like your screenies. I'm jealous. Bill
"Tina Fisher" <tini_fisher@hotmail.com> wrote in message
news:2mc4svk0017h1e89puc3gbcut3dnkg01bh@4ax.com...

"Bill Fenley" <billfenley@cfl.rr.com> wrote in message
news:Gbxwb.58782$86.882676@twister.tampabay.rr.com ...


Waaza "GeForce 3 4800"? No such beasty.

On Tue, 25 Nov 2003 00:16:38 GMT there was darkness, "Bill Fenley"
<billfenley@cfl.rr.com> floated above the darkness and said :


P 3.0, fx5800, 1024 mb ram running at 1280x1024 with everything maxed

i have to admit i have installed tons of eye-candy add-ons !

in that particular screenshot though, you will only notice the
fs-genesis mesh and the carenado centurion virtual cockpit!

<<< Tina >>>
--
I use my alternate email-adress here, so responses
to email might take a while. :-)

I'm looking at a Gainward FX5600 Ultra... hopefully that will do the
trick for 1024x768 everything maxed (2.8 Ghz 1GB RAM)

On Tue, 25 Nov 2003 18:14:01 +0100, Tina Fisher
<tini_fisher@hotmail.com> wrote:




----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---

Question - I have just purchased (a couple of days ago) the Lago
meshes for South Germany, Switzerland and East and West Austria. Have
you used these and if so, would it be worth switching? I don't know
the mesh numbers - 76,4m for this, but not sure what the Lago is.
(will have to check).

Can you check something for me? Courchevel (LFLJ) - with the lago
mesh, it is basically impossible to fly in and out of - I know LFLJ
is an interesting airport but looking at the shots on airliners.net
and the lago mesh doesn't even come close.

I'm curious what it looks like with fsgenesis - perhaps a screenshot?

I don't have Lago's mesh for East France so I'm guessing the Schweiz
mesh did it - I flew in and out of there before the mesh and it's
"livable"....

Danke

On Mon, 24 Nov 2003 17:36:13 +0100, Tina Fisher
<tini_fisher@hotmail.com> wrote:




----== Posted via Newsfeed.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeed.com The #1 Newsgroup Service in the World! >100,000 Newsgroups
---= 19 East/West-Coast Specialized Servers - Total Privacy via Encryption =---

On Sat, 29 Nov 2003 22:46:52 +0100 there was darkness, FlyingAxx
<FlyingAxxx@gmx.net> floated above the darkness and said :


Hi Axx!

hehe, still looks weird - Justin, can you see this?

screenshot:
http://members.aon.at/marcelwidi/tini/ambri.jpg

it would appear, that - whilst Justin did give us more detailled
mountains - the elevation data of the landing strip is still the one
Microsoft provided ...


<<< Tina >>>
--
I use my alternate email-adress here, so responses
to email might take a while. :-)

HI Tina,

Looks like the default airport's elevation is off a bit. Or perhaps the
runway is on a slope in real life and this can't be modeled easily in FS2004
at the moment.

Anyone have any airports specs?

Justin
http://www.fsgenesis.net

"Tina Fisher" <tini_fisher@hotmail.com> wrote in message
news:fl9jsvsk2oh4pnl0gpu0mluqq17k3knhu6@4ax.com...