meljet virtual cockpit no show

I have a 777 Iberia and no virtual cockpit either in 2002 or 9. I can
see the rear cabin but cannot get to it.

Anbyone else got this problem or found a cure for it??

system is 512mb DDram
athlon1.2GHz
Nvidia geoforce

All latest drivers loaded.

"Peter" <prefernot@yahoo.nit> wrote in message
news:ebnq10hpc77u6d9cs33bt6p1o8g4kcpip1@4ax.com...

Re the panel folder does it have bitmaps for interior views? Is it in this
folder where you see the rear cabin? Does the download use the default VC?
Don

"donbutts" <donneybutts@hotmail.com> wrote in message
news:9LhTb.31137$9k7.578458@news.xtra.co.nz...
VC?
because the Meljet I have relies on default..
Don

Peter wrote:


There is no VC in that model...

Bill
--
Fr. Bill Leaming
n4gix@comcast.net
ICQ 12881426

"Wisdom has two parts: 1) Having a lot to say. 2) Not saying it."

Hi

Ta for replying

I downloaded this file from Flightsim and the description in the sim
and in the readme both say virtual cockpit and walk into the cabin.
It's not that I don't believe you but it does seem odd that nearly 8
megs of download and all the blurb -yet no VC.
I will certainly check the folders Don and get back to you.

you wearing a skirt today Peter??
Don

"mary" <oof@whoops.org> wrote in message
news:7gjt10ti0ekb2bbg1mc31apm6quv8ilpc7@4ax.com...

A kilt perhaps!
Actually one connection and one daughter who sometimes remembers to
ask questions on my behalf.

I understand that the 3d VC comes as part of the MDL not as part of
the panel. I am using a special panel downloaded from Flightsim. I
just cannnot reconcile nothing in front but doin a U turn to be
confronted by a back end I cannot get into. Talking about the Meljet
of course.
If what I am hearing is indeed the case what a waste of time!!.
cheers

Peter (and Mary - but sorry! no Pau;l)!

oh well... the times they are a changing.
I'll check that model out if I get time
Don

Hi Don,

When you do, watch out for what's blowin' in the wind!

Regards,
John
"donbutts" <donneybutts@hotmail.com> wrote in message
news:47ZTb.33400$9k7.711917@news.xtra.co.nz...

"Peter" <prefernot@yahoo.nit> wrote in message
news:ebnq10hpc77u6d9cs33bt6p1o8g4kcpip1@4ax.com...


OK I've had a look and sure enough it's a full package with a VC and
interior views. Short of downloading it I can only suggest you treat it as
a manual install and check the placement and contents of each folder.
Compare with default layouts if unsure. Reissue the relative CFG's to both
aircraft and panel.
Quite often this is an extraction error where things go in wrong direction,
not all are extracted or an unecessary folder has been added which closes
the path.
Check with Avsim search to see whether there was a prob and whether a patch
has been issued. (I always forget this)
Not much more I can suggest
Don